Danger Den Black-Series
Tower Case

All the edges now have a 1/4" round over edge!  Optional fan mounts for Hard Drives and a rear 80mm or dual 80mm radiator for secondary loops.  It will house an ATX motherboard and a 3x120mm radiator!

Some Black-Series Cases in the real world:

• Gallery of Photos

Specifications:

• Size: 7.75" Wide x 16.75" Deep x 23" Tall
  
• Motherboard – Standard ATX
• Supports ATX PSU
• Two radiators up to 3x120mm size and 2x80mm size!!
• Radiator mounts with 15mm spacing (Black Ice and Feser radiators)
  
• 4 x 3.5” Internal Drives
• 1 x 5.25” External Drive Bay
• Mounts for 3 x 120mm Fans and 3 x 80mm Fans
  
• Compatible With Most Aftermarket Air Coolers - approx 7" (17.7cm) clearance
• Strong and Durable Acrylic construction

Notable Features:

• Black Acrylic Frame, Top, Base and Motherboard panels perfect for showing off the case, your hardware, and hiding all the wires!!!
• All external edges are rounded
• All external mounting screws are flush mount countersunk.
  

Options:

• Colors - Frame & otherboard Tray, Top and Bottom are Black except for the "Phantom" case:
• "Phantom" Case is all Clear Acrylic
• "BiPolar" Case is a Clear Front and Back
• "Nightmare" Black Front and Back
• "Blood Shot" Deep Red Front and Back
• "Orange Box" UV Orange Front and Back
• "Bruiser" UV Blue Front and Back
• "Gangrene" UV Green Front and Back
• "Yellow Fever" UV Yellow Front and Back

• Fan Grill come standard with the DD logo.  Options to remove the DD logo on the 3x120mm on the front and 2x80mm on the back.  These will be open holes.
• Danger Den is etched in the bottom of each side of the case standard.  This can be removed also.
  
• Graphic Requirements Link - Send us your graphics and we'll cut it into the case

Other Required Components (Purchased Seperately):

• Motherboard, PSU, CPU, etc (all computer hardware for the case)
• Three (3) 120mmfans and up to (3) 80mm fans.
• Light Kits, LEDs, Cathodes to pimp the case and hardware
• Wire sleeving and other parts to hide the wires!
• NOVUS Cleaner #1, #2, and #3 can be used to clean the case. Cleaning should be done before installation. *NEW*- We now carry a kit!

Note: Case Shipment may take up to 10 Business Days.  Please use the "Contact Us" link on the left for an estimated ship date.  We will do everything possilbe to ship it out quickly.

Resources: