Very impressed. My first water cooling set up, and all I can say is why didn't I do this along time ago?! This is no joke, 3800+X2 @ 69F idle state. No over clocks here, as my wife runs a voice studio, and I was after a silent PC. It will not stay at then temp for long when I start doing things, but I couldn't believe it when I saw it. Great job Danger Den!
One of the top performing blocks in the world for Dual Core Single Die processors. The Standard-TDX has stood the test of time by continuing to provide maximum cooling and overclocking possibilities in various system configurations.
The TDX block is designed to give top performance to every water cooling person out there. The TDX block allows customization to get every last drop of performace from the processor.
Compatible with the Athlon64/Opteron 754/939/940.
Includes:
Complete Block Assembled with Top and O-ring
100% Copper 110!
#1 Accelerator Plate
High Flow 1/2" or 3/8" OD Fittings
Stainless Steel Hold Down
Machined Lapped and polished beyond 1200 grit
Pressure tested before shipment to 85psi
Optional:
Additional Nozzle Package include #2, 3, 4, 5, and one blank. Socket wrench included to remove bolts.
Author: Matt Austin I bought this block to make my case look cleaner from my RBX since it has the 3 barb and my temps dropped 2*. Im now running a FX51@2.4Ghz at 30* idle in the south so Im very happy.
Author: Andy I used to have a Maze2 block on my Nforce2 board (which performed quite well). When I got my Athlon64 board I purchased the TDX to go with it. The build quality is amazing! The finish on the bottom was excellent - I had no need to lap the block. I'm g
Author: NoDestiny I used the Maze4 before, it was OK. I re-did my setup with a high end pump and less tubing and this block, and on my A64 3000+, im getting 27* idle and 31* load! AWESOME BLOCK!
Author: Brandon Bought this to team up with my 3700+ and DFI lanparty UT NF3 250GB. This is an amazing block (moved up from a Koolance eXos system to a Danger Den system) Loving this sytem, My room is in the attic so Heat is extreme. Noticed instant temp drops. 5 St
Author: MsB like the chrysler moto, If you can find a better cpu block, Buy It. But you can't, so dont bother.
Author: Thruster very impressed with the quality and performance of this block. the hold down method leaves a lot to be desired though.
Author: Cameron Base had an excellent shine on it. Dropped temps from 57C --> 43C, and the AS5 hasnt even cured yet. Slightly hard to get the thumbscrews onto the bolts, but once there on, its easy.
Author: Reuel I want to get this block but what are Accelerator Nozzles? Why would I order them with this? **It's an accessory for people who like to tune there system. It isn't needed or required**
Author: jake does this work on amd 64 X2???? **YES**
Author: Nick Just got this baby installed running a 3.0e prescott at 3.45 and, only 7degrees over ambient. Will push further. 3.8 is the sweet spot
Author: eric this block is amazing, get it now! i had a athlon 64 3000+ (2.0GHz) clocked at 2.9GHz and it idles at around 29*C. its so amazing. with the stock heatsink i would idle around 40*C at 2.4GHz. im also going to buy a maze4 gpu and chipset block, it will prolly increase my temps by a little bit, but not too much i hope. i have a Black Ice xflow 2 radiator, (2 120mm fans). and a d5 pump with fillport.
Author: osru Hi everyone! I think your site is very interesting and useful. I always bookmarked it.
Author: Keith Swalin Very impressed. My first water cooling set up, and all I can say is why didn't I do this along time ago?! This is no joke, 3800+X2 @ 69F idle state. No over clocks here, as my wife runs a voice studio, and I was after a silent PC. It will not stay at then temp for long when I start doing things, but I couldn't believe it when I saw it. Great job Danger Den!
Add your review here
Detailed images
Send to friend
Customers Also Bought
Customers who bought this item also bought...
