Features:

• Brass or Nickel Plated Brass
• 6-32 UNC or M4-0.7
• Spring Cavity is 0.313" (7.9mm) Diameter x 0.275" (7mm) Deep
  

NOTE:

1. Follow the standard installation included with the CPU block.  Install threaded rod through the motherboard and place the CPU block on the processor.
2. Slide one washer onto the each threaded rod.
3. Slide one spring on each threaded rod.
4. Thread the new CPU Hex Nut onto each threaded rod.
5. Tighten each nut in a cross pattern until each nut makes contact with the CPU Block hold down bracket.