Streamline the installation of a water cooling system with a Danger Den Fillport.

The aluminum fillport is bright dip anodized. The cap is nickel plated brass and a wrench is included. Recommend for use as a fillport.

NOTE: When using as a DRAIN port Danger Den recommends using the Acetal/Delrin style or the Brass style Fillport.

Installation:

• Cut a 1" (2.54cm) hole in the top or side of the case.
• Slide in the Fillport
• Secure nut on the underside of the Fillport.
• Connect tubing to the Tee or Reservoir
• Hose Clamp, Wire Tie, or secure tubing

Resources:

Images: