Features:

• 100% copper 110 Base with Micro Fins
  
• EN Nickel Plated Mid Plate and Top
• *NEW* Stealth Spring Mounting System
• 1/8" Powder Coated Steel Hold Down
  
• Threaded fitting ports are G 1/4 BSPP
• Complete Block with all O-Rings
• Pressure Tested to 50psi
• Fittings sold separately
  
• Machine lapped and flat mirror polished

Benefits:

• 58 Heat Dissipating Fins at a 0.5mm pitch and 0.25mm channel. Providing enhanced transfer of heat to the water and optimum coverage of the CPU
  
• Significant temperature drops on high TDP processors and major Overclocks.  Observed over 7C drop versus MC-TDX.
  
• Ready to install designed and tuned for your system for top performance
• Anti-Tarnish coating applied to prevent finger print or environmental changes.  This specialized formula also has no affect on cooling potential.
• Corrosion will not occur when used with other Copper and Brass parts.  Avoid using non-anodized aluminum (or all aluminum) if at all possible for maximum component life.

Advantages:

• Danger Den always available Tech Support via phone, email, and forums!
• Installation Documents and Videos on most products!

Notes:

• Verify proper mount before power up.  Check the thermal compound imprint and verify the block isn't touching any capacitors.
• Optional backplate is 1/8" acrylic and covers the Intel Backplate.  A gasket surround the Intel backplate for additional protection.
  

Pressure and Flow Data:

Performed Independently by Martin's Liquid Lab: