A great addition for any case to add lighting. This light strip is 12 inches long and can be changed to any color. The lights can also be cycled and programmed. It is recommended to only connect 4 LED lightstrips per controller.

Lightstrip and connector only. Requires the Remote and Controller bundle.

Product Features:

• Waterproof 1024 SMD LED Ribbon Light, White PCB, Flexible
• 30cm with 36 SMD LEDs
• Width: 10mm
• Beam angle: 120 degrees
• Working voltage: 12V DC
• Color: Red, Green, Yellow
• Easy snap-in connectors
• Soft material and bendable, there is a PCB inside bend at a sharp angle.
• Major reduction in power costs
• Low Heat
• No UV or IR light radiation
• Super brightness
• Long life: Over 60,000hour
• CE approved & ROHS compliant.
• Ideal for Car and motorcycle decorative lighting, Window display lighting, also retail display case lighting

Product Spec:

• Color of bulbs: RGB
• LED View Angle: 150°
• Color of background: White
• LED type: SMD 1204
• Number of LEDs: 36 (Red:12pc, Green:12pc, Yellow:12pc)
• LED Brightness (each LED):
• LED Luminous Intensity (per pc): Red 210, Green 550mcd, Blue 210mcd
• Size: 300(L) x 10(W) x 2(D) mm
• Weight:8.65 G
• Adhesive: 3M
• Cutting interval: 7.5 , 15, 22.5 cm
• Voltage: 12V DC 20~40KHz
• Current: ＜240mA
• Power Consumption: ＜2.88 W（36 pcs LED）
• Life: ＞20,000 Hours
• Operating Temperature: -0° ~ 50°
• Storage Temperature :-5 ~ -70°
• Storage humidity: 0% ~ 80%
• IP Rate: IP64
• Maximum connected q'ty for 2A transformer: 8 pcs
• CE Approval
•Use with 12V vehicles also

Benefits:

• Super bright Warm White (or Cool White) LED's
• Flexible and durable • Simple to install
• Adhesive strip on backside
• Extra long wiring cable lets you place strip wherever you like in your vehicle or window case.
• For use with any make of car, van or motorcycle 　

Material:

• Light source: 36 Bright SMD LEDs (per 30CM)
• Connector: 4PIN • Material of surface: Epoxy
• Material of PCB: FPCB • PCB: Soft
• PCB Color: White Note:
• As this device is very thin and soft. Avoid sharp bends
• Clean, dry and make sure surface is smooth before attaching LED strip.
• Do not overload or it will shorten the life of LED
• Do not connect to any AC outlet. Use AC/DC adapter or molex connector.
• Strip is NOT waterproof!