The Xtender tunnel reduces fan dead space and improves the airflow through a radiator. The air turbulence is increased within this tunnel volume and eliminates the dead spot below the middle of the impeller.
It can be used with any Radiator available on the market with standard 120mm dimensions.
It has 2 LED mounts for use with supplied LED Module.
LED Mounts are designed for standard LEDs. Customization with other 5mm LED's is possible.
It consists of pure PMMA Acrylic Material.
By mounting this item on a radiator, it will increase the cooling performance up to 20%
Reduce noise by lowering fan speed
Dimensions: 120 x 120 x 31 mm
Weight: 106g
The Xtender tunnel reduces fan dead space and improves the airflow
through a radiator. The air turbulence is increased within this tunnel
volume and eliminates the dead spot below the middle of the impeller.
IMPORTANT NOTES & INSTALLATION GUIDE!
1. Improve performance in both a Push or Pull setup. A slight performance gain is in the Pull setup.
2.
It is always better for the cooling performance, to push/pull ambient temperature into the case and through the
radiator.
3. The supplied screws are 4x M3/65mm and 4x
M4/65mm and selected for use with 120x120x25mm fans. M3 screws are used
for our Xchanger Series. M4 should work with other rads. Screws are not supplied for fans with 38mm height. **Note** M4 screws are a tight fit and some force is needed to install.
4. Use the supplied silicon pad/noise absorber between Xtender and fan. Currently designed with the 17mm fan hole spacing but can be trimmed for 15mm radiator fan spacing.
MOUNTING ORDER:
1. Xchanger Radiator (or other brand)
2. Silicone Pad (supplied with radiator - in our case Xchanger)
3. Xtender Shroud
4. Silicone Pad - supplied with Xtender
5. Fan
6. Washer
7. Screw
Install the LED Module after you installed the Radiator properly.
Customer feedback
Product rating
Product rating
Voting
Customer Reviews
Author: Hal I purchased 4 of these for my Torture Rack case. They look awsome lit up. They do quiet the fan noise down noticably. Included with the shrould is a vibration sleeve. It's a great deal. The included mounting screws are to short for 120x38mm fans. Thanks DD for offering this product. A must buy for the Quiet PC WC build. This product works great, and the included LED's and vibration sleeve makes it a reasonable priced product.
Author: Red_Rain These are awesome! I'm using two of these to mount my Black Ice SR1 240mm rad to the back of my case. The LED's that come with this shroud are high quality and look fantastic.
Add your review here
Detailed images
Send to friend
Customers Also Bought
Customers who bought this item also bought...
