CATEGORIES
Store Sales
New Products
Must Have Products
Cases
Water Cooling Kits
Water Blocks
Pumps
Radiators
Fans and Accessories
Reservoirs
Tubing & Fittings
Water Additives
Thermal Paste
Peltiers/PSU/Insulation
Cables and Sleeving
Case Lighting
Misc. Hardware
Special Deals
Tools for Modders
Custom Projects

BESTSELLERS
  Plastic Snap Tubing Clamps
  Tygon 3603 Tubing
  ClearFlex 60 Tubing
  7/16" ID (5/8" OD) Masterkleer General Purpose Clear PVC Tubing
  DD-High Flow Fittings


PRODUCT REVIEW
This case is great for moving your liquid cooling away from your computer parts. This allows you to have more radiators and keep your system cooler. I used it to make my system quieter by adding more radiators and going with quieter fans. Beware when you purchase this that there is no front panel to the case. It's exposed and that was a concern for me as I have a cat. The idea of her getting into a fan or the electrical mess at the bottom was frightening. I turned the case to face the wall to prevent this.
See All Reviews

MANUFACTURERS
Danger Den
Hardware Labs
The Feser Company
(UN)Designs
Bitspower
Scythe
XSPC
Yate Loon
BoxGods

SPECIAL
Gift certificates
Sales & Specials

HELP
Product Map (A-Z)
Instructions
Contact Us
Reviews
Terms & Conditions

275 Review(s) Found
Displaying: 201 - 250 reviews(s)
Product Reviews
Previous page   Next page

Product: DD - 8800 GTX

Review: I've been liquid cooling for 4+ years. This block is the highest quality I've seen yet. I had a koolance block fall apart on my board and observed condensation using the tygon tubing sold by another vendor. Danger Den sells thicker tubing, which is just right for my setup (no more condensation). More important, this block exceeds my expectations. Also, I'm very happy w/the DD radiator AND MOST DELIGHTED BY THE EXCELLENT CUSTOMER SERVICE. Cooling EVGA'S 8800GTX (831) & in a loop with my FX60, idle~30c to load~40c.

Author: Mrs.Cool
Rating:



Product: 7/16" ID (5/8" OD) Masterkleer General Purpose Clear PVC Tubing

Review: There was no need to use worm drives or any type of hose clamps. What I did was boil a pot of water, put the end of the tubing in the water for about 5 seconds, and slided it onto the barbs. They will not come off unless you *really* pull with all your might. What Changy said, you'll have to slice the tubes if you want them off.

Author: Khriez
Rating:



Product: Black Ice GTX360

Review: Great unit However. Why don't you sell a shroud for this unit I have had it for 2 years now and have never been able to find one.

Author: Carl
Rating:



Product: DD - 8800 GTX

Review: Wonderfull piece of art. Awesome cooling power. Lowered GTX much more than I expected. Worth every penny.

Author: Lord AtTiLAs
Rating:



Product: DD - 8800 GTX

Review: Excellent quality that I've come to expect from Danger Den. From cosmetics to performance, this water block is HIGHLY RECOMMENDED for 8800GTX owners!

Author: Bryan B
Rating:



Product: 7/16" ID (5/8" OD) Masterkleer General Purpose Clear PVC Tubing

Review: I agree about the tightness. Once they're on they ain't coming off without a tug of war! Much easier to cut them with a sharp knife!

Author: Changy
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Have this in my rig cooling the CPU, GPU, North, South and PhysX card. Have a black ice ex 240 and a black ice ex 120 in the loop for max cooling. Very quiet. cant say how it cools as I have had to replace my evga mother board for the 3rd time now (its gonna be replaced with the GigaByte 680i board) This pump rocks and once the air is gone its as quiet as the dead.

Author: Wolf
Rating:



Product: 7/16" ID (5/8" OD) Masterkleer General Purpose Clear PVC Tubing

Review: Sooooo MUCH better than the tubing I was previously using. Get this stuff! It's cheap, it's nice, and with ½" fittings you won't have to worry about leaks. Be warned though, it will most likely need to be cut off ½" fittings due to the tightness.

Author: bunny10
Rating:



Product: Black Ice XtremeIII Radiator

Review: Been using this for 2 years now with ZERO problems what so ever. I admit it is much larger than I expected but that's not a problem! Currently I'm only running two fans on it, my chain consisting of a Radeon X800Pro card, an Athlon 64 3500+, and my Nvida4 chipset. Even after going through all thatm and only using two fans, I'm getting 35c on the processor under typical use. In heavy load I've never seen anything higher than 42c. The air in the case is warmer than anything else.

Author: HackerZC
Rating:



Product: Tygon 3603 Tubing

Review: you can tie this stuff in a pretzel without a kink, really! its great stuff, well worth its price

Author: eyean540
Rating:



Product: Brass Fillport

Review: Brass kicks ass !

Author: eyean540
Rating:



Product: Copper TDX Block for Intel 775 / 1155 / 1156 / 1366

Review: DD TDX is great, incredibly high quality makes for a block that cools excellently. Recommended for all !

Author: eyean540
Rating:



Product: DD - 8800 GTX

Review: OMG this block is AWESOME!! Beautiful quality (of course) and it lowered card AND ambient temps over 20C! If you are sick of having your case feeling like the interior of the sun, this is the block to get to cool down that nuclear explosion we all call an 8800GTX.

Author: Flybye
Rating:



Product: Black Ice Xtreme Radiator

Review: good rad, cools really well and fit in my case looking to get a 2nd one dd rocks

Author: james
Rating:



Product: (Discontinued) DD-Single 5 1/4" Bay Reservoir

Review: So far so Good the Smoke version is HOTT!

Author: Jack Finchum
Rating:



Product: DD-Case Badge

Review: They do look very sexy. I agree that they should give these out for free with purchases of over a certain limit. Say, 150 dollars.

Author: Roger Korth
Rating:



Product: Aqua-Drive Hard Drive Block

Review: This HDD block is very good! It cools down my 10.000 Raptor/WD 200Gb (2xHDD's) whitout a problem to 30 degrees celcius. (DD D5 Pump).

Author: Appolyon
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Wow! this pump is so much better then the D4! It is much quieter even on 5th stand. Great temperature's even with (CPU/GPU/NB/HDD loop) in the WC loop.

Author: Appolyon
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: I bought this pump with a TDX CPU block, and you don't hear it as long as the air is out of the loop. Probably one of the best pumps on the market ^_^

Author: OneWingedAngel_
Rating:



Product: DD-Case Badge

Review: I wish they gave this with purchases of say over $100 or something Looks great tho...wish I had one

Author: DDcooler
Rating:



Product: Black Ice Pro II Radiator

Review: Very nice rad... Easy to install easy to use, all in all an easy produkt. It cools very nice as well, and its afforteble for normal people. Nice produkt Shake

Author: Shake
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Super quiet. I thought it was loud at first, very disappointed. Then all the air bled out of the system and it was silent! (even on highest setting). This thing keeps my high flow system rockin'! Thanks DD!

Author: Derek
Rating:



Product: Black Ice Pro II Radiator

Review: Great for my X800/ Pentium 560 loop. Idles about 30C and load is 44C (ambient of ~25C). I have two vantec stealths on this system and its all internal. Very very nice rad for the price!

Author: Derek
Rating:



Product: Copper TDX Block for Intel 775 / 1155 / 1156 / 1366

Review: Amazing block, helped me cool my hot hot Prescott. In a loop with Maze4 GPU and BIP2, has my temps REALLY low (and its all internal). Down to about 30C idle, 43 load. Yay high flow!

Author: Derek
Rating:



Product: Perfect Seal G 1/4 Fittings

Review: Hi been watercooling since 03 using DD Awesome Products. always used 1/2 however the 3/8 g1/4 fittings have the same inner dia as the 1/2 version less hose less room taken up.

Author: great product
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: This is a small quiet little monster that cools my gpu cpu and nf4 without ant probs! i just love this pump! Greetings from Sweden

Author: tommy rydberg
Rating:



Product: Black Ice Pro Radiator

Review: I accidentally cracked my old Black Ice radiator so I had to get a new one. When I recieved it, I was very pleased with this product. Comes with 2 Brass-Nickel fittings with O-rings. Much happier with these over the old model's built in fittings. Aside from the improvement, it works great. Couldn't be happier.

Author: Paul T
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: its not bad pretty loud when its on high i keep mine at medium

Author: good
Rating:



Product: Copper TDX Block for AMD XP/MP

Review: God I love this thing! :D Coupled with AS5 and a Black Ice Xtreme rad, it keeps my OC'ed AXP 2400+ running at 2.5GHz on a 1.775VCore nice and cool at 31*C during an extended Prime95 stress test. Like the swapable lucite tops as well -- when I go A64 I can keep my cooling!

Author: Ducky
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Nice little pump! Decently quiet even on highest setting. Pushes nice amount of liquid too -- coupled with TDX and Black Ice Xtreme, keeps my AXP Mobile 2400+ (stock 1.8GHz) OC'ed to 2.5GHz at 31*C Prime95 load!

Author: Ducky
Rating:



Product: DD-Case Badge

Review: they really need to give you this instead so u can show-off your stuff and you advertise for them as well!!! especially after spending $150 in danger den products

Author: latin man
Rating:



Product: DD-SLI Kit Solution using two (2) Acetal MAZE5GPU

Review: Will this work with the 7900's? **YES**

Author: Mackerey
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: quite-as-a-mouse, powerfull too!!!

Author: latin
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: BEST AND MOST REALIABLE PUMP ON THE MARKET! I have a huge circuit which concist of 3/8, and 1/4 tubbing cooling MY CPU (PRESCOTT 3.4 Running at 21.4C Idle, 28.9C Load) Northbridge Chip, VGA Chip, 2 SATA HDD's, & 2 DDR Sticks! Pump is quiet as my gf's

Author: ROBERT
Rating:



Product: MAZE4 for Athlon64 & Opteron G34/754/939/940

Review: Does this work on AMD 64 X2? **YES**

Author: Nightmare
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Wonderfully silent pump. Once you finish getting out all the air (I used 3.5 speed for most of it and 5 for the last bits) Brilliant, works quite nice through an RBX, two 6800s in SLi and a Black Ice Extreme flawlessly :)

Author: Ishbuu
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: I was wondering what the dimensions of this pump are. I gotta know if it will fit in my Silverstone TJ07 without too much clutter (as 1/2" tubing tends to create).

Author: Andrey
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: This is great pump. Its a little hummer at the #5 setting, but nothing i cant live with.

Author: Dave Alfaro
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Very nice pump, easily handels my cpu and sli blocks, very quiet and powerful.

Author: Eric (Taxi-Driver)
Rating:



Product: Fillport Reservoir

Review: Gives a nice custom look and built sturdy. Did leak slightly between the res and the case when the case was tipped over for bleeding, but otherwise sound (will never operate with fluid at that gasket normally anyways).

Author: Richard S.
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Very powerful, very quiet once air is bled off (contrary to what other reviewrs said), and had no troubles when using Tygon. Great product!

Author: Richard S.
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: I love this pump, it is so well built, very small and dead quiet even on the #5 setting I can't even hear it at all, I had a Hydor L35 and the noise it made was way too LOUD even when all the air was out, this pump is 100 times better. Also would not reco

Author: Andy
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: This pump is great. Once the air was bled out the pump doesn't make a noise. The pump has more than enough power to pump through 3 blocks.

Author: John
Rating:



Product: DD-SLI Kit Solution using two (2) Acetal MAZE5GPU

Review: I would also like to know if this will work with 7800s ^_^ **YES**

Author: Ultimax
Rating:



Product: Black Ice XtremeIII Radiator

Review: This radiator is HUGE. Make sure you have plenty of room for it, and plenty of need for it. You only really need this rad if you're cooling some really hot hardware. Well worth the price if you are. Mine cools a 3.4P4@3.8 and a 9800XT with a peltier.

Author: WhiteBoy88
Rating:



Product: TDX and D5

Review: Does the block come with the luctite top or the copper? I want the copper one if it means I am gonna cost me more. **DD** Brass tops are an option and additional costs

Author: Serious Buyer
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: WOW!!!!! this pump is so quiet that i can hear my hard drive over it. and exelent flow too.

Author: chenlahav
Rating:



Product: (Discontinued) DD-Single 5 1/4" Bay Reservoir

Review: The construction is good, and no leaks after several weeks of using.

Author: CounterMeasure
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Deffinatly quiter than D4 but noise is still an issue, im using the foam for pelts around the pump, to quieten it slightly,

Author: Alex
Rating:



Product: DD12V-D5 Pump Variable Speed by Laing

Review: Holy Crap!!! This is the most quiet, fast, smallest pump I have used. I had the MAG3 and that was really loud and bubled up the water alot. This one does not do that, plus it has an adjustable flow rate. Oh Man, I cant say enough about this one. Get

Author: Gold3nMan
Rating:


Previous page   Next page

 

YOUR CART
Cart is empty
 

View cart
Checkout
Wish list
Orders history
Returns

AUTHENTICATION
Secure login 
Register 
Recover password

If Javascript is enabled in your browser click here

Reseller Ratings

Follow dangerden_JERM on Twitter

PayPal



Copyright © 2000-2013 Danger Den